Learn the principles and practices of welding, with an emphasis on welding processes and safety regarding hazards such as extreme temperatures, burn hazards, dust and noise. Both shielded metal arc, or stick, welding and gas tungsten arc, or TIG, welding are covered.
Welders are in great demand in construction, manufacturing and fabrication in industries such as building and bridge construction, power plants, metalworking and aircraft manufacturing and maintenance. Career opportunities also exist in sales, quality control, supervision and welding-related self-employment.
Industry-recognized credential(s): United Association Certification in Shielded Metal Arc Welding and Certification in Gas Tungsten Arc Welding
Complete course in: Six months or less

Able to safely set up and cut with an oxy-acetylene torch
Learned the set-up and use of a SMAW rig
Able to build an effective padding in the flat and horizontal positions
Able to build an effective fillet weld in the horizontal position
Gained a greater understanding of the welding industry
Introduction: Welding gear and PPE, shop safety, and oxy-acetylene and weld safety
Safety: Roles for welders, oxy-acetylene set-up and grinding
Oxy-acetylene Cutting: SMAW set up and SMAW bead and padding
Polarity (handout), SMAW padding (flat), fit-up and tacking, SMAW T-joint (2F) E6013, and oxy-acetylene welding
Electrode classification (handout), SMAW padding (flat), SMAW T-joint (2F) E7024, and oxy-acetylene welding
Other welding processes (GMAW & GTAW), SMAW T-joint (2F) E7024
SMAW T-joint (2F) E7024, SMAW T-joint (2F) E7018, and oxy-acetylene brazing (time permitting)
SMAW T-joint (3F) E7018 and SMAW T-joint (2F) E7024
Finalize all work, SMAW T-joint (2F) E7024, SMAW T-joint (2F) E7018, and clean shop
40
No
None
None
No
N/A
Clear safety glasses, Shade #5 lens cutting glasses, welding gloves with long leather cuffs, welding hood with Shade #10 lenses (minimum), chipping hammer, welding leather jacket, one pair 11R clamps, a 4-1/2" grinder (electrical or pneumatic)
For safety purposes, steel-toe boots are required (leather preferred) and long-sleeved cotton shirts and denim jeans are preferred. No tennis shoes or opened-toed shoes, no cuffed pants or shirts, no open-pocket shirts; no polyester; and no jewelry.
Welding lab and classroom
90% attendance
Demonstrate proficiency with an oxy-acetylene torch,Demonstrate proficiency with the SMAW T-joint using E7024 and E7018 electrodes.
N/A
Participants who want to become welders
N/A
Yes
Welding related self-employment
Quality control
Sales
Fabrication
Manufacturing
Construction
CTP-3001EJ1
CTP-3001B4
Russell Wahrman
919-866-5152
[email protected]
To be notified when this course becomes available, please use
Wake Tech’s Notify Me service
for WLD-3106B1-Industrial Welding - Shielded Metal Arc (SMAW)
.
Learn safety procedures related to the use of SMAW and GMAW welding and oxy-fuel cutting equipment
Learn the types of welding and cutting equipment, as well as their care and use
Be trained in base metal preparation and joint designs used in welding
Welding Safety and Care and Use of Tools and Equipment
Oxy-fuel Safety and Oxy-fuel Cutting Equipment
Base Metal Preparation and Joint Designs
Shielded Metal Arc Welding (SMAW)
Gas Metal Arc Welding (GMAW)
Fabrication and Welding Project
96
No
None
None
No
Each student is required to pass an eye examination, with or without corrective lenses, to prove near-distance acuity such that the student can read a minimum of Jaeger Number 1 or equivalent type and size letters at a distance of at least 12 inches on a standard Jaeger test chart, as well as reasonably measured gross stereopsis (depth perception).
Students must purchase a welding leather jacket, a welding helmet with a minimum shade #10 lens, extra external and internal clear lenses for the helmet, shade #5 cutting glasses or goggles, reusable ear plugs, welding gloves, a long leather gauntlet cuff, high-top leather boots with safety toes, clear safety glasses, a chipping hammer, a hand wire brush (carbon steel for SMAW/Stick and stainless steel for GTAW/Tig, two pair of 11R vise-locking C clamps, a measuring tape, a 4½-inch angle grinder with guard (electrical), 4½-inch grinding discs (1/8 and 1/4 inch thickness), welding pliers (Welpers), an eight- or 10-inch adjustable wrench (adjustable crescent wrench), and a material thickness gauge.
N/A
90% attendance
Successful completion of welding project,Minimum grade of 70% on written tests,Successful completion of hands-on demonstrations of skills, including etching analysis of welds
N/A
Participants who want to become welders
Plumbers, welders
Plumbers, welders
CTP-3001EJ1
EIT-3001B1
WLD-3106B1
WLD-3106C1
Russell Wahrman
919-866-5152
[email protected]
To be notified when this course becomes available, please use
Wake Tech’s Notify Me service
for WLD-3106A7-Welding
.