Explore a career in the automotive industry, enhance your skills, or start your own business.
Transportation Career Field Courses
Basic Auto Maintenance
Course ID: AUT-3137G3 | Details
Learn skills for entry-level automotive service positions in oil and lube maintenance, and gain confidence for the job market. The course will cover automotive systems, driving safety, working in a bay area environment, customer service, service managers’ expectations and career options as well as industry trends. Also, this class is a good opportunity for individuals who would like to learn basic car maintenance.
| Section | Start Date | End Date | Location | Instructor | Price | Open Seats | |
|---|---|---|---|---|---|---|---|
| 298386 | Northern Wake Campus | Berry | 79.00 | 4 | Register |
Auto Dealers Pre-Licensing 12 Hour Course
Course ID: SEF-3001E7 | Details
This course is approved by the NC Division of Motor Vehicles for the initial licensing of independent auto dealers. It covers licensing requirements, state and federal laws, frequently-used forms, dealer license plates, and vehicle safety inspections.
| Section | Start Date | End Date | Location | Instructor | Price | Open Seats | |
|---|---|---|---|---|---|---|---|
| 298356 | Northern Wake Campus | Flythe | 145.00 | 0 | Notify Me | ||
| 298357 | Northern Wake Campus | Flythe | 145.00 | 9 | Register | ||
| 298358 | Northern Wake Campus | Flythe | 145.00 | 19 | Register |
Escort Vehicle Driver Certification
Course ID: SEF-3001F7 | Details
This course fulfills NC Department of Transportation (NCDOT) requirements for the certification of drivers of oversize/overweight load escort vehicles, as required by G.S. 20-119 and detailed in 19A NCAC 02D.0644. The NCDOT administers the course, which includes instruction in safe and effective escort skills, an examination that documents course comprehension, and a system for recognizing drivers certified by NC or another state.
| Section | Start Date | End Date | Location | Instructor | Price | Open Seats | |
|---|---|---|---|---|---|---|---|
| 298370 | Northern Wake Campus | Flythe | 88.00 | 17 | Register | ||
| 298371 | Northern Wake Campus | Flythe | 88.00 | 20 | Register | ||
| 298372 | Northern Wake Campus | Flythe | 88.00 | 20 | Register |
NC On-Board Diagnostics (OBD II) Vehicle Emission Inspection
Course ID: SEF-3001G7 | Details
Students must come to class with the following:
PPE (FULL LENGTH PANTS AND CLOSE TOE SHOES)
Pen/pencil
LT-310 Action Form- Signed by employer
*STUDENTS WHO SHOW UP TO CLASS NOT PREPARED WITH THE ABOVE WILL BE ASKED TO TRANSFER TO AN ALTERNATIVE COUSE*
This training will familiarize students with the mandates and procedures required for certification as a North Carolina On-Board Diagnostics (OBD II) Inspector-Mechanic. It is designed to meet the licensing (and licensing renewal) requirements for the OBD II Emissions Inspection Program administered by the NC Division of Motor Vehicles, License and Theft Bureau. Participants must bring safety glasses, a state-issued ID, station number and a signed LT-310. DMV certification will be issued upon full payment of tuition. NOTE: Successful completion of this course requires 100% attendance and satisfactory class participation; late students may not be admitted. All Texts including the LT-310 Action Form-Revised June 2020 are downloadable using this link: https://www.nccommunitycolleges.edu/workforce-continuing-education/training-credentials/instructor-resources/auto-safety-and-obd-emissions-aut3129
| Section | Start Date | End Date | Location | Instructor | Price | Open Seats | |
|---|---|---|---|---|---|---|---|
| 300523 | Southern Wake Campus | Flythe | 90.00 | 1 | Register | ||
| 300526 | Northern Wake Campus | Berry | 90.00 | 0 | Notify Me | ||
| 300525 | Northern Wake Campus | Flythe | 90.00 | 13 | Register | ||
| 300527 | Northern Wake Campus | Flythe | 90.00 | 11 | Register | ||
| 300528 | Northern Wake Campus | Berry | 90.00 | 13 | Register | ||
| 300530 | Northern Wake Campus | Flythe | 90.00 | 11 | Register |
NC Vehicle Safety Inspection
Course ID: SEF-3001BU2 | Details
This training will familiarize students with the mandates and procedures required for certification as a North Carolina Vehicle Safety Inspector-Mechanic. It is designed to meet the licensing (and licensing renewal) requirements for the NC Vehicle Safety Inspection Program administered by the NC Division of Motor Vehicles, License and Theft Bureau. Participants must bring safety glasses, a state-issued ID, station number and a signed LT-310. DMV certification will be issued upon full payment of tuition. NOTE: Successful completion of this course requires 100% attendance and satisfactory class participation; late students may not be admitted. All Texts including the LT-310 Action Form-Revised June 2020 are downloadable using this link: https://www.nccommunitycolleges.edu/workforce-continuing-education/training-credentials/instructor-resources/auto-safety-and-obd-emissions-aut3129.
| Section | Start Date | End Date | Location | Instructor | Price | Open Seats | |
|---|---|---|---|---|---|---|---|
| 300267 | Northern Wake Campus | Berry | 90.00 | 0 | Notify Me | ||
| 300099 | Northern Wake Campus | Flythe | 90.00 | 11 | Register | ||
| 300097 | Northern Wake Campus | Berry | 90.00 | 2 | Register | ||
| 300532 | Northern Wake Campus | Flythe | 90.00 | 16 | Register | ||
| 300533 | Northern Wake Campus | Berry | 90.00 | 16 | Register | ||
| 300535 | Northern Wake Campus | Flythe | 90.00 | 16 | Register | ||
| 300537 | Northern Wake Campus | Berry | 90.00 | 16 | Register | ||
| 300538 | Northern Wake Campus | Flythe | 90.00 | 16 | Register | ||
| 300539 | Northern Wake Campus | Flythe | 90.00 | 16 | Register |
Motorcycle Basic Rider Course
Course ID: CSP-4000A3 | Details
Are you ready for adventure? Interested in becoming a motorcyclist? This course is designed for new riders who have never ridden a motorcycle, and for re-entry riders who have not ridden in a long time. This is an MSF (Motorcycle Safety Foundation) course; successful students will receive endorsement cards and will not have to take the riding portion of the DMV test. Please review the General Information page for riding gear needed and other requirements. Motorcycles are provided for training purposes.
| Section | Start Date | End Date | Location | Instructor | Price | Open Seats | |
|---|---|---|---|---|---|---|---|
| 299232 | Southern Wake Campus | Hill | 250.00 | 2 | Register | ||
| 299236 | Southern Wake Campus | Gifford | 250.00 | 0 | Notify Me | ||
| 299238 | Southern Wake Campus | Picket | 250.00 | 0 | Notify Me | ||
| 299241 | Southern Wake Campus | Hill | 250.00 | 0 | Notify Me | ||
| 299242 | Southern Wake Campus | Tarby | 250.00 | 0 | Notify Me | ||
| 299244 | Southern Wake Campus | Hill | 250.00 | 0 | Notify Me | ||
| 300439 | Southern Wake Campus | Hill | 250.00 | 0 | Notify Me | ||
| 300440 | Southern Wake Campus | Tarby | 250.00 | 0 | Notify Me | ||
| 300441 | Southern Wake Campus | Picket | 250.00 | 6 | Register | ||
| 300442 | Southern Wake Campus | Picket | 250.00 | 9 | Register | ||
| 300444 | Southern Wake Campus | Hill | 250.00 | 10 | Register |
FAA Part 107: Commercial Drone (UAS) Pilot Exam Training
Course ID: SEF-3001GD2 | Details
Careful – flying a drone can get you into legal trouble if you don't know the rules. But once you know them, there’s money to be made! The FAA now requires all commercial drone pilots to pass a certification test to pilot a UAS (Unmanned Aerial System). This course prepares you for that test with classroom instruction and instructor feedback.
No active courses available at this time.
To be notified when this course becomes available, please use Wake Tech's Notify Me service.
Three Wheel Motorcycle Basic Motorcycle Rider Course
Course ID: CSP-4000JD2 | Details
Need to enhance your 3-wheel motorcycle riding skills? This is a basic, entry-level, learn-to-ride 3-wheel motorcycle training and education course. It provides the same fundamental skills as the MSF Basic RiderCourse, but on 3-wheel, 3-track motorcycles (not sidecars). Rider Coaches who have been trained and certified by the MSF conduct this course. This course consists of classroom instruction, riding exercises, and a knowledge and skills test. A completion card and a DMV Skills Test License Waiver will be issued upon successful completion of the course.
No active courses available at this time.
To be notified when this course becomes available, please use Wake Tech's Notify Me service.
Drone (UAS) Flight Operations & Training
Course ID: SEF-3001OJ2 | Details
You have passed the FAA-107 test and you want to put your drone to use but how do you know what your drone is capable of? How do you know what you are capable of? How can you learn to maneuver and explore your potential safely as a pilot?
This class helps to answer those questions for each pilot through classroom instruction and flight training. You can bring your own UAS unit or you can use ours as you practice. Training will familiarize students with UAS system hardware as well as flight maneuvers common in both commercial and private use.
So if you are wanting to utilize your UAS more, better know your capabilities or want more guidance on how to effectively use this technology this class is for you!
No active courses available at this time.
To be notified when this course becomes available, please use Wake Tech's Notify Me service.
Electric Vehicle Supply Equipment (EVSE) Technician Certification
Course ID: EVT-4100A7 | Details
The course covers the fundamentals of electric vehicle charging and different levels of charging infrastructure, manufacturers and products, regulations governing chargers and charging installations, and demonstration of the specific skills required to work on various types of chargers.
| Section | Start Date | End Date | Location | Instructor | Price | Open Seats | |
|---|---|---|---|---|---|---|---|
| 299485 | Off Campus Facilities | 600.00 | 1 | Register |
Automotive Maintenance and Light Repair
Course ID: AUT-3137A7 | Details
Welcome to our comprehensive Automotive Maintenance and Light Repair Course. This class is designed to equip students with essential skills and knowledge needed in the dynamic automotive repair field. Throughout the modules, participants will explore hands-on exercises covering engine repair, bolt and nut identification, measuring techniques, service literature interpretation, transmission fundamentals, suspension and steering systems, brake maintenance, electrical/electronic systems, and engine performance. Our engaging and practical approach includes demonstrations, certifications, and real-world exercises, ensuring students gain the confidence and proficiency required for success in the automotive industry. Whether you're a beginner or looking to enhance your existing skills, this program provides a solid foundation for a rewarding career in automotive technology.
| Section | Start Date | End Date | Location | Instructor | Price | Open Seats | |
|---|---|---|---|---|---|---|---|
| 298045 | Northern Wake Campus | Tang | 230.00 | 2 | Register |
Automotive Electrical
Course ID: AUT-3137H7 | Details
This course covers basic electrical theory, wiring diagrams, test equipment, and diagnosis /repair/replacement of batteries, starters, and alternators. Topics include Ohm’s Law, Circuit construction, wiring diagrams, circuit testing, and basic trouble shooting. Upon completion, students should be able to read and understand wiring diagrams, diagnose test, and repair basic wiring, battery, starting, charging, and basic electrical concerns.
No active courses available at this time.
To be notified when this course becomes available, please use Wake Tech's Notify Me service.
Advanced Automotive Technician Training with NCSI/OBD II
Course ID: AUT-3137I7 | Details
This course introduces students to Shop key, Scanner & Lab scope, Basic Automotive Electrical, Lift Safety, Alignment, Digital Vehicle inspections, AC Diagnostics & will include NC safety & Vehicle Inspections. It also includes the safe operation of shop equipment, such as automotive lifts. Students will learn how to identify automobile failures and perform maintenance and service, as well as how to research technical information electronically to determine correct service procedures and specifications. This course also prepares students for Automotive Service Excellence (ASE) A6 & A7 and students will receive National Coalition of Certification Centers (NC3) certifications.
No active courses available at this time.
To be notified when this course becomes available, please use Wake Tech's Notify Me service.
Engine Repair - Automotive
Course ID: AUT-3137J7 | Details
This course covers the theory, construction, inspection, diagnosis, and repair of internal combustion engines and related systems. Topics include fundamental operating principles of engines and diagnosis, inspection, adjustment, and repair of automotive engines using appropriate service information. Upon completion, students should be able to perform basic diagnosis, measurement and repair of automotive engines using appropriate tools, equipment, procedures, and service information.
| Section | Start Date | End Date | Location | Instructor | Price | Open Seats | |
|---|---|---|---|---|---|---|---|
| 299579 | Northern Wake Campus | Egan | 250.00 | 10 | Register |
Automotive - "The Switch" Building an Electric Vehicle
Course ID: AUT-3137K7 | Details
This course will cover all of the components and electronics in a simple electric vehicle. Students will learn about electrical measurements such as Volts, Ohms, Amps, and Watts. During the lab portion of the course we will build an electric vehicle from the frame up. Students will study the theory of each component then install it on the vehicle. Components include the high voltage battery, on board charger, power inverter, motor, high voltage safety interlocks, lighting, brakes, and suspension. After the build is finished, students will configure software and test drive the vehicle.
| Section | Start Date | End Date | Location | Instructor | Price | Open Seats | |
|---|---|---|---|---|---|---|---|
| 298521 | Northern Wake Campus | McNary | 200.00 | 5 | Register |
Automotive - Zeus Oscilloscope and CAN bus Theory
Course ID: AUT-3137L7 | Details
This course features Snap-On certifications delivered through NC3 for the Zeus Oscilloscope, which lead into CAN diagnostics. Class time will feature hand-on use of the Zeus scan tool and scope operations with trainers, followed by shop time with testing CAN bus faults on vehicles.
No active courses available at this time.
To be notified when this course becomes available, please use Wake Tech's Notify Me service.
MVAC- Mobile Vehicle Air Conditioning Diagnostics
Course ID: AUT-3137M7 | Details
This course focuses on diagnosing automotive air conditioning. We will cover refrigerant flow, types of compressors, and ASE section 609 certifications. Classroom time will include review of wiring diagrams of control circuits, researching specs and procedures, and refrigerant handling regulations. Lab time will include hands-on practice with vehicles, using multi-meters, scan tools, and Recovery, Recycling, and Recharging equipment. Students should learn strategies to cut diagnostic time and improve accuracy towards Fixed Right the First Time. Wake Tech will prepare students for 609 certification, students must register with ASE to obtain the license.
No active courses available at this time.
To be notified when this course becomes available, please use Wake Tech's Notify Me service.
Hybrid & Electric Vehicle Dianostic & Repair
Course ID: AUT-3137N7 | Details
This course will provide an in-depth study of the technology, maintenance, and repair of hybrid, plug-in, and all electric light duty passenger vehicles. Basic diagnostic, repair, and maintenance procedures of the unique systems associated with hybrid and electric vehicles will be discussed and practiced. Special tools and diagnostic equipment will be used during the laboratory exercises.
No active courses available at this time.
To be notified when this course becomes available, please use Wake Tech's Notify Me service.
Automotive Painting & Refinishing
Course ID: AUT-3109D7 | Details
This course introduces the proper procedures for using automotive refinishing equipment and materials in surface preparation and application. Topics include federal, state, and local regulations, personal safety, refinishing equipment and materials, surface preparation, masking, application techniques, and other related topics. Upon completion, students should be able to identify and use proper equipment and materials in refinishing following accepted industry standards.
*THIS IS A REQUIRED COURSE TO BE ELIGABLE TO TAKE AUTO BODY RESTORATIONS PROJECT BASED CLASS*
No active courses available at this time.
To be notified when this course becomes available, please use Wake Tech's Notify Me service.
C.A.R.S - Campus Automotive Repair & Service Summer Academy -High School Students
Course ID: SEF-3001AC7 | Details
You may not be able to drive a car yet, but you can prepare early by learning some basics of how to care for cars.
Learn how to open the hood and safely check and adjust fluid levels, check engine hoses and belts, check and adjust tire pressures, check windshield wipers and lighting systems, and more.
This week students will get hands on to learn about safety, engines, electrical, hybrid and electric cars and even airbrushing!
No active courses available at this time.
To be notified when this course becomes available, please use Wake Tech's Notify Me service.
Forklift Operator Training
Course ID: OSH-3012B7 | Details
This course provides instruction on the operation and maintenance of an industrial forklift and is designed for those individuals that want to obtain or renew their certification. Core topics include forklift design, controls and instrumentation, pre-use inspection, safety awareness, and forklift stability. This course meets the training requirements for related Occupational Safety and Health Administration (OSHA) regulations. This course is eight (8) hours of training and students are required to attend 100% to be eligible to be credentialed. Students must be at least 18 years old and have a valid driver's license.
| Section | Start Date | End Date | Location | Instructor | Price | Open Seats | |
|---|---|---|---|---|---|---|---|
| 298363 | Northern Wake Campus | Fowler | 90.00 | 0 | Notify Me | ||
| 298364 | Northern Wake Campus | Fowler | 90.00 | 12 | Register | ||
| 298367 | Northern Wake Campus | Fowler | 90.00 | 12 | Register |
Hybrid & Electric Maintenance Safety Precautions
Course ID: AUT-3137G7 | Details
Electric vehicles (EVs)* have improved considerably over the past few years and with these improvements, their benefits have grown as well. Not only are they cleaner for the planet and environment, but they help save on fuel and maintenance costs. Today’s models can drive farther on a single charge and have impressive speed and performance. Several options can go from zero to 60 mph in a few seconds. And best of all, prices have come down, making EVs an affordable option for nearly everyone. Learn more today!
No active courses available at this time.
To be notified when this course becomes available, please use Wake Tech's Notify Me service.
Automotive Advanced Air Conditioning Diagnostics
Course ID: AUT-3137O7 | Details
This course focuses on diagnosing automotive air conditioning. We will cover refrigerant flow & types of compressors. Classroom time will include review of wiring diagrams of control circuits, researching specs and procedures. Lab time will include hands-on practice with vehicles, using multi-meters, scan tools, and Recovery, Recycling, and Recharging equipment. Students should learn strategies to cut diagnostic time and improve accuracy towards Fixed Right the First Time. Students should take this course AFTER completing EPA 609.
| Section | Start Date | End Date | Location | Instructor | Price | Open Seats | |
|---|---|---|---|---|---|---|---|
| 299696 | Northern Wake Campus | McNary | 100.00 | 15 | Register |
Automotive Advanced Electrical Refresher
Course ID: AUT-3137R7 | Details
This course covers electrical theory, wiring diagrams, test equipment, and diagnosis /repair/replacement of batteries, starters, and alternators. Upon completion, students should be able to read and understand wiring diagrams, diagnose test, and repair basic wiring, battery, starting, charging, and basic electrical concerns.
| Section | Start Date | End Date | Location | Instructor | Price | Open Seats | |
|---|---|---|---|---|---|---|---|
| 300392 | Northern Wake Campus | Tang | 100.00 | 14 | Register |
Oscilloscope Training
Course ID: AUT-3137P7 | Details
This class will cover digital oscilloscope and CAN Bus theory. The lab portion will cover students using the Oscilloscope to verify CAN Bus Signals.
| Section | Start Date | End Date | Location | Instructor | Price | Open Seats | |
|---|---|---|---|---|---|---|---|
| 299695 | Northern Wake Campus | McNary | 100.00 | 17 | Register |
Light Electric Vehicle Training Course
Course ID: AUT-3137F7 | Details
This Light EV, E-Bike,
No active courses available at this time.
To be notified when this course becomes available, please use Wake Tech's Notify Me service.
Automotive IMI Level 3 High Voltage Certification Training
Course ID: SEF-3001AL7 | Details
This course will deliver Automotive High Voltage Certification Training under the guidelines of the European regulation ECE-R-100 and the IMI Level 3 Training curriculum. This course will cover Electrical engineering, high voltage safety, high voltage system understanding and high voltage certification. This class is online modules as well as hands on in person in order to gain certification.
| Section | Start Date | End Date | Location | Instructor | Price | Open Seats | |
|---|---|---|---|---|---|---|---|
| 300520 | Northern Wake Campus | 160.00 | 12 | Register |
Automotive Wheel Alignments
Course ID: AUT-3137Q7 | Details
Students will learn to use wheel alignment equipment. The course covers alignment theory and angles, as well as hands-on portions performing pre-alignment inspections, making measurements and performing basic adjustments on the vehicle. This course includes Hunter training materials and certification.
| Section | Start Date | End Date | Location | Instructor | Price | Open Seats | |
|---|---|---|---|---|---|---|---|
| 300393 | Northern Wake Campus | McNary | 100.00 | 15 | Register | ||
| 300394 | Northern Wake Campus | McNary | 100.00 | 15 | Register |
Commercial Drivers License: CDL Permit Exam Prep
Course ID: TRA-3605B3 | Details
Welcome to the CDL Permit Exam Prep Course, where we prepare you to conquer the challenges and earn your Commercial Driver's License (CDL) with confidence! This comprehensive program is designed to equip you with the knowledge and skills required to pass the CDL written exam and practical skills test, setting you on the path to a rewarding career as a professional truck or bus driver. Job openings are everywhere in the commercial driving industry and we can help you take the next step toward your new career!
No active courses available at this time.
To be notified when this course becomes available, please use Wake Tech's Notify Me service.
Automotive Explorers Program - Ages 12-16
Course ID: SEF-3001AJ7 | Details
Explore Careers in the automotive field from A-Z while gaining hands-on work experience in a state-of-the-art facility.
Learn practical automotive skills and life skills while working with professionals and having career mentors.
Engage in your leadership opportunities today!
Co-ed career exploration for 2024-2025 school year.
Please email regina John @ [email protected]
984-489-0688
to learn more today!
| Section | Start Date | End Date | Location | Instructor | Price | Open Seats | |
|---|---|---|---|---|---|---|---|
| 299490 | Northern Wake Campus | McNary | 150.00 | 0 | Notify Me |
Electric Vehicle Supply Equipment (EVSE) Technician Certification - TRAIN THE TRAINER SESSION ONLY
Course ID: SEF-3100AK7 | Details
The course covers the fundamentals of electric vehicle charging and different levels of charging infrastructure, manufacturers and products, regulations governing chargers and charging installations, and demonstration of the specific skills required to work on various types of chargers.
*Through our train the trainer's workshop, we will guide you on how to be a better online or in-person trainer and gain practical skills you can use right away. In this workshop, we discuss how to lead engaging small group exercises and practice methods for managing participants.
*This is an interactive workshop and must be restricted due to training capacity. Each workshop session is in person. Registrants receive slides
No active courses available at this time.
To be notified when this course becomes available, please use Wake Tech's Notify Me service.
Auto Body Restoration - Project Based Class
Course ID: AUT-3109B7 | Details
Are you interested in auto body restoration? This course provides knowledge and skills in automobile construction and design; cleaning, removing, and installing parts; painting; use of tools; safety procedures, and more. Students will participate in realistic training activities and work on their own projects.
No active courses available at this time.
To be notified when this course becomes available, please use Wake Tech's Notify Me service.
Collision Repair & Refinishing Technology
Course ID: AUT-3109E7 | Details
This course introduces safety, equipment, structural damage analysis, and damage repairs. Topics include shop safety, design and construction, structural analysis and measurement, equipment, structural glass, repair techniques, and other related topics. Upon completion, students should be able to analyze and perform repairs to a vehicle which has received light/moderate structural damage. This course will also cover the terms and procedures for welding various metals used in the transportation industry with an emphasis on personal safety and environmental health. Topics include safety and precautionary measures, setup/operation of MIG equipment, metal identification methods, types of welds/joints, techniques, inspection methods, cutting processes and other related issues. Upon completion, students should be able to demonstrate a basic knowledge of welding operations and safety procedures according to industry standard
*THIS IS A REQUIRED COURSE FOR STUDENTS LOOKING TO TAKE THE PROJECT BASED AUTO RESTORATION COURSE*
No active courses available at this time.
To be notified when this course becomes available, please use Wake Tech's Notify Me service.
