Course Offerings

Welcome to our comprehensive Automotive Maintenance and Light Repair Course. This class is designed to equip students with essential skills and knowledge needed in the dynamic automotive repair field. Throughout the modules, participants will explore hands-on exercises covering engine repair, bolt and nut identification, measuring techniques, service literature interpretation, transmission fundamentals, suspension and steering systems, brake maintenance, electrical/electronic systems, and engine performance. Our engaging and practical approach includes demonstrations, certifications, and real-world exercises, ensuring students gain the confidence and proficiency required for success in the automotive industry. Whether you're a beginner or looking to enhance your existing skills, this program provides a solid foundation for a rewarding career in automotive technology.

Course Objectives

This class will cover the basics in the following ASE training areas:
A1-Engine Repair
A2-Automatic Transmission/Transaxle
A3-Manual Drive Train & Axles
A4-Suspension & Steering
A5-Brakes
A6-Electrical/Electronic Systems
A7-Heating & Air Conditioning
A8-Engine Performance

Outline of Instruction

Module 1: Engine Repair
1. Introduction to Automotive Industry
2. Hand Tool Identification (NC3)
3. Shop Safety and Vehicle Lifting
4. Vehicle Inspection Demo and Practice
5. Lubricants Presentation
6. Oil Change Demonstration and Practice
7. Engine Tear Down and Parts ID (Demo Engine)
8. Drive Belt Replacement Exercise

Module 2: Bolt & Nut ID, Measuring, and Service Literature
1. Bolt & Nut ID Presentation and Exercise
2. Torque Wrench Demonstration and Practice
3. Basics of Measuring Presentation and Exercise
4. ShopKey Pro Service & Repair Level 1 (NC3)
5. Repair Order Basics Presentation and Exercise

Module 3: Transmissions
1. Transmission Basics Presentation
2. Fluid Level & Condition Checking Presentation and Exercise
3. Driveline Presentation and ID Exercise
4. Driveshaft/U-Joint/CV Axle Inspection Demonstration and Removal Exercise

Module 4: Suspension & Steering
1. Tire ID & Inspection Presentation and Exercise
2. Tire Dismount, Mount, and Balance Presentation and Exercises
3. Resetting Tire Pressure Monitoring Exercise
4. Steering & Suspension Systems Presentation and ID Exercise
5. Alignment Demonstration

Module 5: Brakes
1. Braking Basics Presentation
2. Brake Parts ID Exercise
3. Brake Fluid Testing Demonstration
4. Brake Pad and Rotor Measurements Demonstration and Exercise
5. Brake Pad and Rotor Removal & Replacement Exercise
6. Electronic Parking Brake Resetting

Module 6: Electrical/Electronic Systems
1. Battery/Starting/Charging System Design Presentation
2. Battery Testing and Removal Exercise
3. Starting/Charging System Testing Demonstration and Certification (NC3)
4. Multimeter Usage and 525F Multimeter Certification (NC3)
5. Relay and Circuit Testing Practice

Module 7: Engine Performance
1. Fuel System Basics Presentation
2. Fuel Filter Removal & Replacement Exercise
3. Air Delivery Basics Presentation
4. Air Filter Removal & Replacement Exercise
5. Ignition System Basics Presentation
6. Spark Plug Removal & Replacement Exercise

Contact Hours

96

CEUs

1

Industry Standard, State or National Certification

Certification

Automotive Service Excellence (ASE) & National Coalition of Certification Centers (NC3)

Website

https://www.ase.com
https://www.nc3.net

Certification Learning Outcomes/Requirements

CE or CU Articulation

No

Prerequisites

None

Learning Supplies Needed

None

Clinical Site/Special Facilities

None

Requirements for Successful Completion

90% attendance
Successful completion of this course requires 90% attendance and satisfactory class participation (i.e., be able to demonstrate proficiency in all concepts taught). If a student has extenuating circumstances causing absences of greater than 10% of the class time, the student must make arrangements with the instructor to provide evidence of keeping up with the class material and making up the work, exercises, and projects missed; or demonstrate competency in the course objectives. Students with irregular attendance, less than 90% attendance, or is unable to demonstrate competency will receive a grade of NG (no grade).
Lab exercises, when applicable, are due on the date assigned by the instructor. Late assignments may be accepted only at the instructor's discretion.

Accreditation/Special Approval Requirements

N/A

Intended Audience

Students interested in Automotive Repair

Specific Industry or Business Support Needs

Auto Servicing and Repair

Wake County Need for Industry Positions

Automotive Maintenance Technicians

Industry or Job Titles Related to Training Outcomes for Employment

Entry-Level: Automotive Maintenance Technician

Related Courses

AHS-AUTE1

AHS-AUTE2

Course Contact Information

Justina Barreiro
919-819-0203
[email protected]